Skip to content

40 TAPER CONTROL SERIES

Control Series angle heads are designed to be used on machining centers equipped with automatic tool changers. The orientation ring and the arrester arm, which carries the arrester pin, can both be rotated through 360°. This allows easy adjustment of the drive taper relative to a stop block mounted on the machining center spindle housing.

Variation: T90cn-5L is available. Detailed Specs included in the Complete Specs Document.

Get a Quote

MONOLITHIC FLANGE ARM

One piece flange arm and pins grant increased rigidity and stability to the whole structure while machining. Ultra precise pitch dimension.

BEARINGS

Super-precise ABEC 7 and 9 Class Bearings. They ensure perfect concentricity and stability during machining.

GEARS

Gears are made out of special hardened super-alloy. They are completely ground and treated with isotropic polishing that results in a dramatic reduction of vibrations and friction.

SOLID OUTPUT SPINDLE

Solid piece spindle made out of hardened steel to increase resistance to bending stress by up to 25%. Achieve higher RPMs without vibrations.

GS 600 TOOL BODY

Increased thermal stability and rigidity compared to materials such as steel and aluminum. Bearing housing surfaces are completely ground.

MECHANICAL SEALS

Special composition low friction seals reduce heat build up and keep contaminants out. High pressure rotary joint allows up to 100 Bar Coolant Pressure.